Home › Bar turning or CNC machining: how to choose the process for your part
Technical blog

Bar turning or CNC machining: how to choose the process for your part

Both technologies make turned parts, but each one shines with a different type of part. Here is how to decide.

When a part is rotational, it is almost always made on a lathe. The question is which one. In our workshop we work with two families of machines: Citizen L32-X sliding-head lathes for bar turning and Nakamura-Tome twin-spindle, twin-turret multitasking centres. Choosing the right process has a direct impact on price, lead time and quality.

When to choose bar turning

The sliding-head lathe supports the bar with a guide bush very close to the tool. This makes it ideal for:

  • Small-diameter parts, up to Ø32 mm.
  • Long, slender parts that would deflect on a conventional lathe.
  • Medium and large series, where automatic production reduces the unit cost.

When to choose multitasking CNC machining

Twin-spindle, twin-turret centres with Y axis turn and mill the part on both sides in one set-up. They are the best option for:

  • Larger diameters, up to Ø51 mm bar.
  • Parts with milling, flats, cross holes or complex geometries.
  • Prototypes and short or medium runs.

The decision is best made with the drawing

In practice, many parts can be made with either technology, and the choice depends on annual volume and tolerances. That is why, when you send us a drawing, we analyse both options and propose the one with the best balance of cost, lead time and quality.

Have a part in mind?

Send us the drawing or a sample and we will reply with a technical and commercial proposal within 24 to 48 working hours.